Hawke Precision Steel Ring Mounts 1″ Medium Weaver With Nut
The Hawke Precision Steel Ring Mounts are a 2-piece, 1-inch diameter set designed for Weaver and Picatinny rails, supplied in medium height for rifles where modest objective clearance is needed. Construction is solid steel throughout, giving the rings the rigidity and resistance to recoil that demanding field use requires. Rail clamping is via a hex nut (1/2-inch, 8-32 thread), tightened securely to the cross-slots of any Weaver or Picatinny base, while the scope tube is locked in place by double Torx T15 cap screws (6-48 thread) on each ring half. Medium height puts the ring centre at 41 mm above the rail — practical for most standard objective lenses on centrefire and rimfire rifles without adding unnecessary height over bore. At 149 g for the pair, the rings are solid without being heavy.
Specifications
| Feature | Detail |
|---|---|
| Mount Type | Weaver and Picatinny |
| Diameter | 1 inch |
| Height | Medium (41 mm above rail) |
| Material | Steel |
| Clamping Nut | 1/2-inch, 8-32 thread |
| Scope Screws | Double Torx T15, 6-48 thread |
| Weight (pair) | 149 g |
FAQ
What is the height of the medium ring mount?
The ring centre is at 41 mm above the rail.
Are these mounts compatible with both Weaver and Picatinny rails?
Yes, the Hawke Precision Steel Ring Mounts are compatible with both Weaver and Picatinny rails.
What type of screws are used to secure the scope tube?
Double Torx T15 cap screws with 6-48 thread are used to lock the scope tube in place.
Melanie Oliver –
Installed the rings on my rimfire rifle and they fit perfectly. The steel construction feels solid and the scope stays stable even during recoil. Easy to tighten with the hex nut and Torx screws. No wobbling after shooting.
Frank Berry –
Good fit for my medium-height scope. The rings are durable and don’t flex under pressure. Took a few minutes to tighten the screws properly, but once set, they hold well.
Sophie Berry –
Used these on a centrefire rifle for hunting. The height is just right for my lens. No issues with alignment or stability. The steel feels strong and the screws are easy to work with.